Overview
- The converter uses 25Hz-50Hz high frequency square wave excitation to effectively reduce the flow noise;
- Use the latest signal processing technology and noise suppression algorithm to achieve stable measurement;
- Good zero-point stability, small steady state fluctuation rate, fast dynamic response speed;
- Sensor with wear-resistant lining, suitable for flow measurement of solid or non-uniform liquids.
Technical Specification
Nominal Diameter | DN15~DN600 |
Electrode Material | 316L, Hb, Hc, Ti, Tan, Pt |
Lining Material | PTFE, PFA, F46, PU polyurethane, Ceramic |
Dielectric Conductivity | ≥5μS/cm, (softening water ≥20μS/cm) |
Accuracy Level | ±0.5%R~1.0%R |
Flow Range | 0.3m/s~6m/s |
Ambient Temperature | A:≤80℃;B:≤120℃ |
Nominal Pressure | 0.6MPa~1.6MPa (based on the meter size) |
Installation Form | Compact/Remote |
Housing Material | Stainless steel, Carbon steel |
Process Connection | Flange-type |
Main Application | Mainly used for pulp, coal water slurry, mud (containing micro particles), cement slurry and other slurry measurement. |
Others | Same as flange-type |