BACK

FMAG-F Flanged

 
Overview

The intelligent electromagnetic flowmeter consists of two parts: a sensor and a converter. It is based on Faraday’s law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5 μS / cm.

In addition to measuring the volumetric flow of general conductive liquids, it can also be used to measure the volumetric flow of highly corrosive liquids such as strong acids and alkalis, and uniform liquid-solid two-phase suspension liquids such as mud, pulp, and pulp. After setting the density, the mass flow of the conductive liquid can be measured.

Technical Specification
Nominal Diameter DN3 to DN1200
Electrode Material 316L, Hb, Hc, Ti, Tan, Pt
Lining Material Neoprene, Polyurethane, PTFE, PFA, F46
Dielectric Conductivity ≥5μS/cm, (softened water ≥ 20μS/cm)
Accuracy Level ±0.5%R~±1.0%R
Flow Range 0.3m/s~12m/s
Ambient Temperature -20℃~+60℃
Medium Temperature A:≤80℃;B:≤120℃;C:≤180℃ (split PTFE lining)
Nominal Pressure 0.6MPa~4.0MPa (based on the meter size or special order)
Protection Level IP65, IP67, IP68(remote-type)
Output Signal 4~20mA,frequency/pulse, alarm output
Communication RS485, RS232, MODBUS485, HART, PROFIBUSDP
Power Supply 220VAC,24VDC
Installation Type Compact/Remote
Flange Standard GB, ANSI, JIS, DIN
Shell& Flange Material Stainless steel, carbon steel, etc.

Contact Us

Do you have a question about products? Need quotation? Want feedback from us?

Email

steven@flommit.com

cindy@flommit.com

Phone

+8618606310107

+8613614080180

Our Location

room 201, No.10 building, ZichenTianziwan,Economical&Technological Development Zone, Weihai, Shandong,China.Postcode:264200

Copyright © By FM 2020.